ABOUT THE STEDI TYPE X™ PRO
You only need one glance to realize that the sky was the limit when designing the STEDI TYPE-X™ PRO (Registered Design Number 201814836 & Registered Trademark)
Back in 2016, we released the original Type-X™ and completely disrupted the high performance driving light market. If you haven’t heard about the legendary reputation of V1.0 TYPE-X™, start by checking out the Youtube comparisons. With the introduction of our PRO Edition, we are yet again redefining the auxiliary driving light category. Our all-new Type-X™ PRO edition epitomizes our commitment to maximizing light output and reliability at levels that surpass the most respected players in the industry.
WHATS IN THE BOX
- 2 x STEDI Type-X PRO LED Driving Lights
- 2 x Protective STEDI Black Out Covers
- 2 x Grey Colour Rings
- 2 x Orange Coloured Rings
- 1 x Smart High Beam Wiring Harness DTP-2 Sealed Connectors
- H4 + HB3 adapter plugs to high beam
- 60A Relay, Fuse, Switch
- Complete Stainless Steel fastener kit.
- Wiring & Fitting Instructions
KEY SPECIFICATIONS
| LED | 37 x Oslon High-Flux LED |
| RAW LUMENS | 26,270 (Pair) |
| TESTED LUMENS | 15,870 (Pair) |
| AMP DRAW | 10.4A @ 13.2v (each) |
| POWER DRAW | 137W |
|
CANDELA |
1,334,025cd |
| BEAM PATTERN | 6 x Spread 31 x Pencil Beam |
| INGRESS PROTECTION | IP68 | Submersible up to 3m |
| COLOUR TEMP (CCT) | 5700K |
| VOLTAGE COMPATIBILITY | 12v & 24v |
| LUMEN MAINTENANCE | 50,000 LM-80 |
| WEIGHT | 2.860kg (each) |
| PHOTOMETRIC DATA | |
| 10 M | 13,340 Lx |
| 50 M | 533 Lx |
| 200 M | 33 Lx |
| 300 M | 14 Lx |
| 400 M | 8 Lx |
| 1,000 M | 1.3 Lx |
| 1,155 M | 1 Lx |
EXPLODED DIAGRAM
Installation of the TYPE X Pro is quite simple and is easiest explained via the below exploded diagram. Most will find it easier to set up the bracket first and once fitted, install the lights. Note that compared to our TYPE X V1, these do not require the shock dampeners to be fitted.
For wiring instructions, Click Here.
NIGHT DRIVING FOOTAGE
ACCESSORIES & PERSONALIZATION
COLOUR CHANGING RINGS
New to our STEDI Type X Pro driving lights are the colour changing rings that will give you the option to match the accents around your vehicle or even just do something a little unique. In the box, we included Grey and STEDI Orange with optional extras including Red, Blue, Pink, Green now with Yellow & Sandy taupe sold separately.
COMPATIBLE COVERS
Type X PRO comes included with the blacked-out "STEDI" branded covers. All covers from our generation 1 Type X are compatible with the new Type X PRO. You can order the optional clear, amber, wicked smile, blue and more covers from the below "shop now" link.
| 7" Stedi Type-X Covers | 8.5" Stedi Type-X Covers |
|
|
FLOOD COVER COMPARISON SLIDER
TYPE X PRO OPTIONAL ANTI-THEFT KIT
If you looking for an option to minimize the prospect of your Type X PRO getting stolen, we offer a comprehensive anti-theft kit.
The anti-theft kit consists of the following fasteners;
- 1 x M10 Nut Security Key
- 1 x M8 Bolt Security Key
- 4 x 8mm Bolts (Long) - Used to secure the brackets to the sides of the Type X (fitted to the adjustment bolt position)
- 2 x 10mm Nuts - Used to secure the bracket to the vehicle in conjunction with the included shank bolt.